It's better to hand-lit own light than look up to someone else's glory. ITCertKey Cisco 300-135 exam tests will be the first step of your achievements. With it, you will be pass the Cisco 300-135 exam tests which is considered difficult by a lot of people. With this certification, you can light up your heart light in your life. Start your new journey, and have a successful life.
The free demo download pdf: http://www.itcertkey.com/300-135_braindumps.html
Cisco certification 300-135 exam tests, study guide, PDF VCE
Exam Name: Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)
NO.1 A customer network engineer has made configuration
changes that have resulted in some loss
of connectivity. You have been called
in to evaluate a switch network and suggest resolutions to
the
problems.
Refer to the topology.
SW1 Switch Management IP address
is not pingable from SW4. What could be the issue?
A. Management VLAN
interface is shutdown on SW4
B. Management VLAN not allowed in the trunk link
between SW2 and SW4
C. Management VLAN ip address on SW4 is configured in
wrong subnet
D. Management VLAN not allowed in the trunk links between SW1
and SW2
E. Management VLAN not allowed in the trunk links between SW1 and
SW4
Answer: C
Explanation:
In the network, VLAN 300 is called the Management
VLAN. Based on the configurations shown below,
SW1 has VLAN 300 configured
with the IP address of 192.168.10.1/24, while on SW4 VLAN 300 has an
IP
address of 192.168.100.4/24, which is not in the same subnet.
300-135 Free
Demo 300-135 pdf 300-135 test answers 300-135 test
NO.2 The implementations group has been using the test bed to
do a 'proof-of-concept' that
requires both Client 1 and Client 2 to access
the WEB Server at 209.65.200.241. After
several changes to the network
addressing, routing scheme, DHCP services, NTP services,
layer 2
connectivity, FHRP services, and device security, a trouble ticket has been
opened
indicating that Client 1 cannot ping the 209.65.200.241
address.
Use the supported commands to isolated the cause of this fault and
answer the following
questions.
The fault condition is related to which
technology?
A. IPv4 OSPF Redistribution
B. IPv6 OSPF Routing
C.
NTP
D. IP NAT
E. BGP
F. IPv4 layer 3 security
G. IPv4 OSPF
Routing
Answer: E
Explanation:
On R1 under router the BGP process Change
neighbor 209.56.200.226 remote-as 65002 statement to
neighbor 209.65.200.226
remote-as 65002
Article Link: http://www.itcertkey.com/300-135_braindumps.html
Cisco certification 300-135 exam tests, study guide, PDF VCE
Exam Name: Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)